Wall Mounted vs Inset vs Freestanding Electric Fires: Which Should You Buy? (UK Guide)
Wall-mounted electric fires are a popular choice in UK homes, and for good reason: they heat a room from a standard 13A plug socket with no recess, no chimney and no electrician, and they sit flush enough to disappear into a wall. Inset fires give the cleanest, built-in look but need a wall opening or cabinet to sit in. Freestanding fires, whether a stove or a fire with its own surround, need no fitting at all and can move with you. The right one for you comes down to how much wall work you're prepared to do, not which looks nicest in a photo.
In this article
- Wall-mounted, inset or freestanding: what's actually different?
- Freestanding electric fires: zero installation
- Wall-mounted electric fires: slim and off the floor
- Inset electric fires: recessed into a wall or cabinet
- Will it actually heat the room, or is it just for looks?
- How much does an electric fire cost to run?
- Do you need an electrician to fit one?
- Can you put a TV above an electric fire?
- Which type should you buy?
- FAQ
Wall-mounted, inset or freestanding: what's actually different?
All three run on the same idea: an LED flame effect you can run with or without heat, plugged into a normal 13A socket. The difference is entirely in how they're fitted, not how they heat.
| Type | Installation | Floor space | Best for |
|---|---|---|---|
| Freestanding | None. Plug in and switch on. | Needs its own floor footprint | Renters, flats, moving it between rooms, or a ready-made fireplace look with a surround |
| Wall-mounted | Fixed to a stud or solid wall with the included bracket | None, it's off the floor | Small rooms, a clean feature-wall look without building work |
| Inset | Needs a recess, cabinet or chimney breast opening of the right size | None once fitted | An existing fireplace opening or a media wall built around it |
Several of our own fires are sold as 3-in-1 units: the same fire can be wall-mounted, recessed or stood on its own feet, so you don't have to commit to one fitting method before you buy. Always check the stated recess opening against the fire's own case dimensions before cutting or building anything in: some fires need the opening larger than the case for clearance, others use an outer frame that sits proud of the wall and covers a slightly smaller hole. Measure first.
Freestanding electric fires: zero installation
A freestanding fire is the lowest-effort option: it arrives built or part-assembled, stands on its own feet, and plugs into any socket. Nothing is fixed to the wall, so it suits rented homes, flats, and anyone who might rearrange the room later. "Freestanding" covers two styles: a stove-style unit, and a fireplace with its own surround or mantel, which gives a traditional look without any building work.
- No recess, bracket or wall fixing needed
- Easy to move between rooms, or take with you when you move house
- Still needs its own patch of floor, so measure the space before you buy
See the full freestanding electric fireplaces collection for more styles and sizes.
Stands straight on the floor with no fitting. Flame-only mode, or 1000W/2000W heat rated for rooms up to 30 m², with a cool-touch casing.
Wall-mounted electric fires: slim and off the floor
This is one of the most popular types, and it's easy to see why: a wall-mounted fire clears the floor completely and reads as a built-in feature without any building work. The slimmest models sit under 9 cm deep, so they project barely more than a thick picture frame.
- Fixed to a stud or solid wall with the supplied bracket, no recess required
- Some models double as recessed or freestanding fires too, so you can change your mind later
- Check the wall type first: a stud wall needs fixings into the studs or suitable wall anchors, not just the plasterboard
Only 8.3 cm deep. Wall-mount it, recess it or stand it on the included feet, with 900W/1800W heat for rooms up to 35 m² and a 14-button remote.
Inset electric fires: recessed into a wall or cabinet
An inset fire sits flush inside an opening, whether that's an existing chimney breast recess, a built-in alcove, or a gap left in a media wall or TV cabinet. It gives the cleanest, most built-in look of the three, but it's the only type where the hole has to be the right size before the fire arrives.
- Measure the opening width, height and depth against the fire's stated recess size, not just its case size
- Leave the stated clearance above and behind the unit so heat can escape properly
- Good for an existing, unused fireplace opening, or a cabinet built specifically to take one
Fits a 66W x 46H x 18D cm opening in a cabinet, media wall or chimney breast. Also mounts on the wall if your plans change.
Will it actually heat the room, or is it just for looks?
Both, but not automatically together. Every fire in this guide runs its flame effect on its own, with no heat at all, so it's entirely possible to buy one purely for the glow and never switch the heater on. That's a genuine choice some buyers make for a snug or a room they don't want to overheat, not a design flaw.
When the heater is on, output is usually given as a wattage with two settings (for example 900W/1800W) and a stated room coverage in square metres. As a rule of thumb, around 100W of heating per square metre of floor area is a common sizing guide for a reasonably insulated room, rising in a poorly insulated or high-ceilinged one. Manufacturer coverage figures are often a little more generous than that rule, so treat the stated square-metre coverage as a best case and size down a setting if your room is older or draughty.
A standard UK 13A socket carries roughly 3kW safely, which is why almost every plug-in electric fire, ours included, tops out at 1800W or 2000W rather than going higher.
If you want heat first and a flame effect second, a dedicated portable heater will usually warm a room faster for the same wattage, since it isn't styled around a glass viewing window. Our electric heaters collection is worth a look if that's your priority over the fireplace look.
How much does an electric fire cost to run?
Running cost comes down to wattage and the price of electricity, nothing else. Under the Ofgem default tariff price cap for 1 October to 31 December 2026, the average Direct Debit electricity rate is 26.32p per kWh. Multiply a fire's wattage (in kW) by that rate to get its running cost per hour.
| Heat setting | Cost per hour* | Found on |
|---|---|---|
| 750W | About 20p | Recessed insert, low setting |
| 900W | About 24p | Ultra-thin wall mounted, low setting |
| 1000W | About 26p | Freestanding stove, low setting |
| 1500W | About 39p | Recessed insert, high setting |
| 1800W | About 47p | Ultra-thin wall mounted, high setting |
| 2000W | About 53p | Freestanding stove, high setting |
*Based on the Ofgem average Direct Debit electricity rate of 26.32p/kWh, 1 October to 31 December 2026. The rate changes every quarter, so treat this as an example, not a fixed price. Running the flame effect alone, with the heater off, uses only the LED lighting and costs a fraction of this.
Is that cheaper than gas? Per unit of heat, usually not. The same Ofgem cap puts gas at 7.97p per kWh including 5% VAT, which is around 9.4p per kWh of heat through a boiler that is about 85% efficient (an assumption, so check yours), against 26.32p for an electric fire. An electric fire does convert close to 100% of its electricity into heat in the room, with no flue losing warmth outside, and it can still be the cheaper choice if it lets you leave the rest of the house unheated.
Do you need an electrician to fit one?
Not for any of the fires in this guide. They're plug-in units with a standard UK cable (1.5 to 1.8 m) that goes into a normal 13A socket, whether you're wall-mounting, recessing or standing them on their feet. Fitting the bracket or building the recess is a DIY or joiner job, not an electrical one.
You'd only need an electrician if you wanted a fire hardwired in with no visible plug or socket, for example built into a wall with the cable chased in behind plaster. That's a different, bespoke job, and it's worth asking an electrician to quote it separately rather than assuming it's included with the fire itself. For a media wall, one tidy option is to ask an electrician to fit a socket inside the cavity behind the fire, so the plug and cable stay hidden.
Whichever fire you choose, a few socket rules apply:
- Plug the fire straight into a wall socket. Don't run it from an extension lead, because a heater draws a high current for long periods.
- Don't mount a fire directly above a socket, and plan the socket position before you fix anything, since the cable is only 1.5 to 1.8 m long.
- Don't cover the fire or block its vents, and keep curtains, furniture and anything flammable clear of it.
Can you put a TV above an electric fire?
Often yes, but it depends on the fire and the TV, so always check both manufacturers' instructions first. There is no single clearance figure that suits every model, so follow whichever of the two stated clearances is larger. The main thing to check is where your fire's heat comes out: a fire that blows heat up from a top vent puts it straight onto the screen, while one that vents from the front or bottom is an easier match.
Our full guide to putting a TV above an electric fire covers clearances, ventilation and the best fire types. If the wall is tall, a fire and TV stand suite puts the screen at a comfortable height just above the fire.
Which type should you buy?
If you're renting, might move the fire later, or don't want to touch the wall: buy freestanding, either a stove or a fire with its own surround. If you want a clean, floating look on a feature wall with no recess: buy wall-mounted, which is also the slimmest option. If you already have a chimney breast opening, an alcove, or a TV cabinet built with a gap for one: buy inset, and measure the opening before you order.
For a living room or bedroom where the fire needs to double as furniture, a combined fireplace and TV stand suite covers both jobs in one piece.
Holds a TV up to 36 inches and 20 kg above the fire, with an open shelf for media and an 8-hour auto-off timer.
Related guides: TV above an electric fire guide and efficiency and running cost guide. This guide is part of our complete guide to keeping a room warm and dry.
Frequently asked questions
Will a wall-mounted or inset electric fire actually heat my room?
Yes, when the heater is switched on. Most models give a choice of two wattages, typically capped around 1800W to 2000W because of standard UK socket limits, and are rated for rooms up to 30-35 m². The flame effect can also run completely on its own with no heat at all.
Is an electric fire cheaper to run than gas?
Per unit of heat, gas is usually cheaper. Under the October to December 2026 price cap, gas costs around 9.4p per kWh of heat through an 85% efficient boiler, against 26.32p per kWh for an electric fire. An electric fire turns almost all of its electricity into room heat with none lost up a flue, and it can still cost less overall if it lets you leave the rest of the house unheated.
Do I need an electrician to fit an electric fire?
No, not for a standard plug-in model. All the fires in this guide run from a normal UK 13A socket and are fitted with a wall bracket, recess kit or their own feet. You'd only need an electrician for a bespoke hardwired installation with no visible socket.
What size recess opening do I need for an inset electric fire?
It varies by model, so always check the fire's own stated recess opening rather than its case size; some need a slightly larger opening for airflow clearance, others use an outer frame that covers a smaller hole. Measure width, height and depth before you cut or build anything.
Does the flame effect on an electric fire look realistic?
Reasonably, though it's an LED effect rather than a real flame, and most people describe it as convincing from normal seating distance rather than indistinguishable up close. Multiple flame colours and adjustable brightness, included on the fires in this guide, help it suit different rooms and moods.
Are electric fires energy efficient?
At the point of use, yes: essentially all the electricity they draw is converted into heat in the room, since there's no flue carrying warmth outside as there is with a gas or open fire. How efficient that makes your bill depends on your electricity tariff and how many hours you run it on a heat setting rather than flame-only.
Shop Opal Retail's Heating & Cooling Range
Electric fires, fireplace suites, heaters and dehumidifiers, in stock now.
Shop Heating & Cooling →Free UK delivery on all orders.