Skip to content
A bright UK bedroom with matching bedside tables sitting level with the top of the mattress on either side of the bed

What Size Bedside Table Do I Need? A UK Height & Bed Fit Guide

A bedside table should sit roughly level with the top of your mattress, give or take about 5 to 10cm either way. Most bedside tables run 45 to 60cm tall, which suits the majority of UK beds, but the only way to know for certain is to measure your own mattress top, since bed frames, divan bases and mattress depths all vary. For width and depth, leave at least 10 to 15cm of clearance beside the bed in a small room, and make sure the top is big enough for a lamp, a book and a glass of water without everything crowding the edge.

In this article

What height should a bedside table be?

The general rule of thumb is simple: the top of the table should sit level with, or up to around 5 to 10cm taller than, the top of your mattress. That keeps a lamp, a glass of water or your glasses within easy reach without you having to sit up or reach down in the dark.

There is no single "standard" UK bed height, since it depends on your divan base, bed frame and mattress depth, so measuring your own bed beats guessing. Once you know that figure, most bedside tables in a typical 45 to 60cm range will get close. On our own range, a compact drawer table stands 55.5cm tall, a fluted-drawer design sits at 50cm, and a taller rattan-style pair reaches 60cm, giving you room to match a specific bed height rather than settling for whatever is nearest the door in a shop.

Bedside table height by mattress height

Measure from the floor to the top of your mattress, then find the table whose height is the same or up to 10cm more. The table below applies that rule to four tables we sell.

Table height Suits a mattress top of about Example from our range
50cm 40 to 50cm Fluted-drawer table, white set of 2
55.5cm 45.5 to 55.5cm 2 drawer side table for small spaces
60cm 50 to 60cm Rattan bedside tables with cupboard
60.4cm 50.4 to 60.4cm BELLAH table with charging station and LED

The mattress ranges are worked out from the rule above (table level with the mattress top, or up to 10cm taller). They are a guide, not a fixed standard. Include any mattress topper you use when you measure.

Does it matter if the table is taller or shorter than my bed?

A little taller is fine and often more comfortable, since you are not reaching down into a dip to find your phone. Noticeably shorter is more of a problem: it is awkward to reach from a lying position, and small items are easy to knock onto the floor as you reach across and down.

A bigger bed tends to want a taller table, since a deeper mattress sits higher off the frame, so if you upgrade from a single to a double or king, check the new mattress-top height again rather than assuming your old table will still line up.

What size bedside table is best for a small bedroom?

Go for a slim, compact design, around 40cm wide or under, rather than a wide chest-style unit. A narrow footprint still gives you a drawer and a flat top, and squeezes into a tight gap between the bed and a wall without blocking a door or radiator.

A slim, compact two-drawer bedside table fitted into a narrow gap beside a bed in a small UK bedroom
A slim table fits a tight gap without eating into the room.
2 drawer side table for small spaces, white and natural wood
Small bedroom pick
2 Drawer Side Table for Small Spaces

Just 40cm wide and 55.5cm tall, with 2 drawers and a flat top for a lamp and a book.

How much surface space do you actually need?

More than most people plan for. The usual essentials are a lamp, a book, a glass of water and a phone, and once you set all four down together they take up more room than you would think. A top around 40 x 30cm is a sensible minimum, and raised edges are a nice extra if you tend to knock things as you reach over in the dark.

A bedside table surface with a lamp, book, glass of water and phone, showing how much space is needed on top
A lamp, a book, a glass and a phone take up more of the top than you'd expect.
Bedside table with fluted drawers and gold metal legs
Generous top
2 Drawer Bedside Table with Fluted Drawers

A 47 x 37cm raised-edge top at 50cm high, plenty of room for a lamp, book and glass with no overhang.

Do both sides of a double bed need the same size table?

Not strictly, but matching makes the room look more considered and it keeps the height consistent on both sides, which matters more than people expect once the lamps are switched off and you are reaching for a glass of water without looking. If one side of the room is tighter than the other, a mismatched pair is a reasonable compromise: a slim table on the cramped side and a slightly larger one where you have room.

A double bed with a matching pair of bedside tables and lamps on either side, both level with the mattress top
A matching pair keeps the height and look consistent on both sides of the bed.
Set of 2 white bedside tables with gold legs
Matched pair
Set of 2 White Bedside Tables with Gold Legs

Two matching 50cm-tall tables with two drawers each, sized for either side of a double or king bed.

Set of 2 rattan bedside tables with storage shelf and cupboard
Matched pair, natural style
Set of 2 Rattan Bedside Tables with Cupboard

60cm tall with a cupboard and open shelf each, a taller match for a higher bed frame.

What should I look for in a bedside table with LED lights or a charging station?

Check what the charging panel actually offers, not just that it has one: look for a mix of UK AC outlets and USB-A/USB-C ports rather than USB only, since most people still have a lamp or a plug-in device to power alongside their phone. For the LED, check whether it is dimmable and how it is controlled, as a fixed-brightness strip can be too bright for the middle of the night. The trade-off is size: bedside tables with charging stations are usually fuller units than a basic drawer table, and most need the anti-tip bracket fixed to the wall, worth doing anyway with children or pets in the house.

Bedside table with LED-lit open shelf, built-in charging station and 2 fabric drawers
LED lights and charging built in
BELLAH Bedside Table with Charging Station and LED Lights

39.6cm wide, 60.4cm tall, with 2 AC outlets, 2 USB-A ports, 1 USB-C port and an app-controlled LED shelf light. Available in white, rustic brown or black.

What to measure before you buy

Five minutes with a tape measure saves a return later:

  • Mattress-top height, floor to the top of the mattress, with any topper you actually use.
  • Clear width beside the bed, from the bed frame to the nearest wall, socket or radiator.
  • Depth available, so the table does not block a door swing or a drawer opening nearby.
  • Reach from your sleeping position, lying down, so you are not stretching for a lamp switch.

If you are also sorting out the bed itself, our bed size and room fit guide covers mattress heights and frame types in more detail, and our bedroom furniture buying guide, part of the wider Home Furniture Buying Guide UK, is worth a read if you are planning the room as a whole.

Choosing a bedside table to go with a new bed? Browse our upholstered bed frames, then finish the room with more modern bedroom furniture.

Frequently asked questions

What is the standard bedside table height?

There is no single official standard. Most bedside tables are 45 to 60cm tall, and the best height is level with your mattress top or up to about 5 to 10cm taller. Measure your own bed, since frames, divan bases and mattress depths vary.

Does my bedside table need to be the same height as my bed?

Roughly, yes. The usual guidance is level with the mattress top, or up to about 5 to 10cm taller, so you can reach a lamp or a glass of water without sitting up. Measure your own mattress-top height rather than assuming a standard figure, since bed types vary.

What size bedside table is best for a small bedroom?

A slim design around 40cm wide or under, rather than a wide chest-style unit. It still gives you a drawer and a usable top without eating into a tight gap beside the bed.

Is it a problem if my bedside table is shorter than my bed?

It can be. A table set noticeably lower than the mattress top is awkward to reach from lying down and makes it easier to knock items off as you reach across and down. A little taller than the mattress is generally more comfortable than a little shorter.

How much space should I leave beside the bed for a bedside table?

At least 10 to 15cm of clearance in a small room, more if you have it, so the table does not block a door, a radiator or a drawer from opening fully.

Do both sides of a double bed need the same size bedside table?

Not strictly, but a matching pair keeps the height consistent on both sides and looks more considered. If one side of the room is tighter, a slim table on that side and a larger one on the other is a fair compromise.

Can I get a bedside table with both LED lights and a charging station?

Yes. Look for a panel with a mix of UK plug sockets and USB ports rather than USB only, and an LED that dims rather than one fixed brightness. A bedside table with charging station and LED tends to be a bigger unit than a basic drawer table, so check the dimensions against your space before you buy.

Shop Opal Retail's Bedside Tables

Slim designs for small rooms, matching pairs for a double bed, and everything in between.

Shop Now →

Free UK delivery on all orders.

Previous article Most Efficient Electric Heater: What It Really Costs to Run (UK Guide)
Your cart

Your cart is empty

Continue shopping