Best Heater for a Garage or Workshop: UK Buying Guide
For a single garage used for DIY or car work, a 2.8kW industrial fan heater on a standard socket will warm the space quickly whenever you need it. For a garage that's been turned into a gym or hobby room, where you want gentle background heat for longer stretches, a quieter oil-filled radiator on wheels is the steadier choice. For a large double garage or a detached workshop, you may need more heat output than a single standard socket can safely supply, and the most powerful heaters need their own industrial power connection rather than a normal 13A plug, so it's worth checking that before you buy anything.
Below is a size-by-size, use-by-use guide built from Opal Retail's own in-stock heaters, their real specifications, and what UK garage and workshop owners actually say online about keeping these spaces warm.
In this article
- What type of heater suits a garage or workshop?
- Insulate first, heat second
- What size heater do you need?
- Our picks for garage and workshop heating
- What to check before you buy
- How much does it cost to run?
- Is it safe to run an electric heater in a garage?
- Does heating a garage cause condensation?
- FAQ
What type of heater suits a garage or workshop?
The two heater types in this guide work in genuinely different ways, and picking the wrong one for how you actually use the space is the most common mistake.
- Fan or ceramic heaters push out warm air fast, which is ideal if you only want heat while you're actively working at a bench or under the bonnet. They cool the space down again just as quickly once switched off, because they're heating the air rather than the room's surfaces.
- Oil-filled radiators take longer to warm up but run quietly, hold their heat for a while after they're switched off, and have no exposed heating element, which makes them a sensible choice if you want to leave one running in the background for an hour or two.
- Radiant or infrared heaters (not covered in this guide) warm you and the objects they face rather than the air. They can feel better in a draughty space where warm air escapes quickly, but they only heat what is in front of them.
Electric heaters of either type produce no combustion fumes, unlike gas or paraffin heaters, which is one reason Opal Retail's garage and workshop range is entirely electric. Gas and paraffin heaters can produce carbon monoxide, so if you already own one, never run it in a closed garage, keep the space ventilated and fit a working carbon monoxide alarm.
Insulate first, heat second
UK garage and workshop owners who discuss heating their spaces online repeat the same point: insulation matters more than the heater's wattage. A single-skin brick garage with an up-and-over door will lose heat about as fast as any heater can put it in, so even a powerful unit will struggle to feel warm. If your garage or workshop is draughty, dealing with the doors, walls and roof first will do more for comfort and running costs than buying a bigger heater. See our guide to insulating a shed, home office or workshop for where to start.
What size heater do you need for a garage or workshop?
Match the heater to both the floor area and how you'll use the space, using the manufacturers' own stated coverage figures below. Those figures work out at roughly 100W per square metre, which assumes a reasonably insulated room.
| Space and use | Heater | Stated coverage | Power supply |
|---|---|---|---|
| Garage gym, hobby room or box room you want to leave warming for a while | 1500W oil-filled radiator | 9-15m² | Standard 220-240V socket |
| Single garage or workshop, fast heat while you're working | 2.8kW industrial fan heater | Up to 28m² | Standard 220-240V socket |
| Large double garage, detached workshop or trade space | 5kW industrial fan heater | Up to 48m² | 380-400V, 5-pin industrial supply, not a standard household socket |
If your garage is a single-skin brick build with an up-and-over door, treat the stated coverage as a ceiling, not a promise, and allow for a more powerful heater or insulate first.
That last row matters more than it might look. The 5kW heater is built for a three-phase industrial supply, the kind you'd find already wired into some workshops and trade units, not a normal domestic socket. If your garage only has a standard ring main, the 2.8kW fan heater or the oil-filled radiator are the ones that will actually plug in and work; the 5kW model is only the right choice if you already have, or are having an electrician install, a suitable industrial supply.
Our picks for garage and workshop heating
Rated for 9-15m², with 3 heat settings, a tip-over safety switch and castor wheels for moving between spaces.
Covers up to 28m² on its high setting, with 3 power modes, a manual tilt head and an automatic thermal cutout. Plugs into a standard socket.
Covers up to 48m² with 17,060 BTU of output. Needs a 380-400V, 5-pin industrial supply, not a standard household socket.
What to check before you buy a garage heater
- Power supply. Confirm the heater runs on a standard 13A socket. Anything that needs a 380-400V industrial supply is a different job.
- Cable length. Measure the distance to your nearest socket before you buy. The cables on the heaters in this guide are short, from 1.3m to 1.6m, so you need a socket close to where the heater will sit rather than an extension lead.
- Thermostat. A thermostat stops the heater running flat out all the time, which saves money and keeps the space steadier. Of the heaters here, the oil-filled radiator has an adjustable 7-35°C thermostat.
- Safety cut-outs. Look for an overheat cut-out and, on a portable unit, a tip-over switch.
- Where it will sit. Allow clear space around the heater, away from the car, sawdust and anything that can burn.
You can see the wider range in our heating and cooling collection.
How much does a garage heater cost to run?
Running cost is the heater's power in kilowatts multiplied by your electricity unit rate. At the Ofgem price cap unit rate of 26.32p per kWh for 1 October to 31 December 2026, running each heater at full power costs roughly:
| Heater | Cost per hour at full power | Cost for 3 hours |
|---|---|---|
| 1500W oil-filled radiator | About 39p | About £1.18 |
| 2.8kW industrial fan heater | About 74p | About £2.21 |
| 5kW industrial fan heater | About £1.32 | About £3.95 |
These are maximum figures. A thermostat switches the heater on and off once the space is warm, so real running cost is usually lower, and a well-insulated garage needs less heat to hold its temperature. Your own unit rate may differ from the cap.
Is it safe to run an electric heater in a garage or workshop?
Garages and workshops raise two safety questions that a living room heater doesn't: the electrics, and what's lying around the space.
- RCD protection. Under the current UK wiring regulations (BS 7671), socket outlets up to 32A, including the kind you'd plug a heater into, need 30mA RCD protection, as the IET explains. An older garage supply may predate that requirement, so if you're not sure the sockets are protected, ask an electrician to check. The HSE also recommends testing an RCD's test button before use and never bypassing one that keeps tripping; investigate the fault instead.
- Extension leads. Avoid them. Electricians commonly advise against running a heater from an extension lead, because heaters draw a high current for long periods. Plug straight into a wall socket, and if you can't reach one, have an electrician fit a socket where you need it. If you ever have to use a lead, make sure it's fully unwound (a coiled lead can overheat under load), rated for the load, and checked for damage.
- Sawdust and offcuts. If you're heating a woodworking space, keep the heater well away from the bench, sawdust and any flammable materials, and don't leave it running unattended.
- A new industrial supply is an electrician's job. If you're buying the 5kW heater and don't already have a suitable industrial supply, that's new electrical installation work, not a DIY job.
Both of Opal Retail's industrial fan heaters have an automatic thermal cutout that shuts off power if the unit overheats, and the oil-filled radiator has a tip-over switch that does the same if it's knocked over.
Does heating a garage cause condensation?
It can. Warming a cold, poorly ventilated space raises the amount of moisture the air can hold, and that moisture condenses back out the moment it touches a cold surface, such as a window, a car body or bare metal tools. Garage and workshop owners who heat their spaces regularly report exactly this. Running the heater for shorter, more frequent spells rather than one long blast, keeping some air moving, and wiping down metal tools after a heating session all help. If condensation on windows is the main issue rather than the heater itself, it's worth tackling separately. In a garage that stays damp, running a dehumidifier alongside the heater also helps protect tools and bodywork from rust; see our dehumidifiers and air purifiers.
Related guides: room-size guide, efficiency and running cost guide and condensation guide. This guide is part of our complete guide to keeping a room warm and dry.
Frequently asked questions
What size heater do I need for a single garage?
For a single garage used for DIY or car work, a 2.8kW fan heater with a stated coverage of up to 28m² suits most UK single garages, which typically run from around 13 to 20m², provided the space is reasonably insulated. In an uninsulated single-skin garage it will struggle, so insulate first or expect to run it for longer. If you just want gentle background warmth rather than a quick blast, a 1500W oil-filled radiator rated for 9-15m² is the quieter option.
Can I plug a powerful heater into a normal socket?
It depends on the heater. Both the 1500W radiator and the 2.8kW fan heater in this guide run on a standard 220-240V household socket. The 5kW industrial fan heater is different: it needs a 380-400V, 5-pin industrial supply and will not work on a normal socket at all.
Will an electric heater trip my fuse box?
A heater on a correctly rated, RCD-protected circuit shouldn't trip your consumer unit on its own. If a circuit trips repeatedly when you run a heater, that's a sign the circuit, the heater, or something else on the same circuit needs checking by a qualified electrician, rather than something to keep resetting and ignoring.
Should I insulate my garage before buying a heater?
If your garage is draughty, single-skin brick or has an uninsulated up-and-over door, yes, that's worth doing first. No heater, however powerful, heats an uninsulated space efficiently, since the warmth leaks out about as fast as it goes in.
Is it safe to use a heater near sawdust or power tools?
Position any fan or radiant heater well away from your workbench, sawdust and offcuts, and don't leave it running unattended. An oil-filled radiator has no exposed element and is generally considered the safer option to run in a space with wood dust around.
Does heating a garage cause condensation?
It can, particularly if the space isn't ventilated. Warm, moist air condenses on cold surfaces like windows, car bodywork and metal tools. Shorter, more frequent heating sessions and some airflow help reduce it.
Shop Opal Retail's Electric Heaters
Fan heaters, oil-filled radiators and more, in stock now.
Shop Electric Heaters →Free UK delivery on all orders.