Skip to content
Bright UK bedroom with a double bed on a black metal bed frame and white bedding

Bed Frames UK: How to Choose Between Metal, Upholstered and Wooden Frames

Choose a metal bed frame if you want the slimmest footprint, the most clearance underneath and the lowest cost. Choose an upholstered frame if you want a padded headboard to lean on. Choose a wooden or wood-effect frame for a warmer, heavier look. Whatever the material, the frame has to fit your mattress size, so decide that first: a bed frame is sold by the mattress it takes, not by its own outside measurements.

In this article

Metal, upholstered or wooden: which bed frame suits you?

Each material trades something against something else. Here is the short version, then the detail in the sections below.

Material Best if you want Watch for
Metal Low cost, a slim footprint, space under the bed Loose bolts that cause noise, thin headboards
Upholstered A padded headboard to sit against, a softer look Dust and marks on fabric, a bulkier headboard
Wooden or wood-effect A warmer, more traditional or industrial look Check what the wood actually is (solid, veneer or particleboard)

Weight limits, dimensions and materials differ product by product, so read each listing rather than assuming. Everything we quote below comes from the product page itself. You can browse the full range in our Beds collection.

What size bed frame do I need?

Buy the frame that matches your mattress. The standard UK mattress sizes, per a UK mattress size guide, are single 90 x 190cm, small double 120 x 190cm, double 135 x 190cm, king 150 x 200cm and super king 180 x 200cm. These are industry sizes, not a legal standard: the National Bed Federation says accepted practice is 20mm either way, so allow a little margin.

The frame is always a few centimetres bigger than the mattress. A frame with a solid headboard and footboard adds more: the industrial frame further down is 141.5 x 195cm for a 135 x 190cm mattress, so 6.5cm wider and 5cm longer. For room fit and a full size comparison, see our bed size guide.

Small double bed frame with a beige linen-look upholstered headboard
Small double, upholstered
Small Double Bed Frame, 120 x 190 cm, Adjustable Headboard, Cappuccino Beige

Frame measures 192 x 120 cm, with a headboard that sets to 110 cm or 116.5 cm and 10 wooden slats.

Do metal bed frames squeak?

Some do, and it is usually fixable. Some owners report squeaks. The usual cause is loose bolts, so retighten every bolt a few weeks after you build it and now and then after.

  • Pick a frame with plenty of legs and cross-supports. More support points mean less flex.
  • Check the stated load. It is a useful sign of how heavily built the frame is. The steel double below states 450 kg as its maximum load.

Metal is also the easiest material for under-bed space. The double below sits 32cm from the floor to the base, which is enough for most storage boxes.

Black powder-coated steel double bed frame with scrolled headboard and footboard
Double, metal
Metal Double Bed Frame with Strong Steel Support

Powder-coated steel, 32 cm from floor to base and a stated maximum load of 450 kg.

For a single room, the black steel single frame takes a 90 x 190cm mattress and has steel slats, with a stated maximum weight of 250 kg.

Are upholstered bed frames worth it?

They are if you read or watch TV in bed, because a padded headboard is more comfortable to lean on than metal tubing. The trade-off is upkeep: fabric holds dust and shows marks, so vacuum it regularly.

Double bed with a padded linen headboard and light wooden bedside tables in a bright bedroom
A padded headboard gives you a soft backrest, but it needs more care than bare metal.

Two details to look at on any upholstered frame:

  • Headboard height. The small double frame above has a headboard that adjusts between 110cm and 116.5cm, so you can set it to suit your pillows and wall. The wingback frame below is 109.2cm tall overall.
  • The fire safety label. Upholstered bed headboards fall under the Furniture and Furnishings (Fire) (Safety) Regulations 1988, which cover beds, divans and their headboards. Look for the fire safety labelling when you buy.

The wingback frame below has a curved headboard and a metal frame under the fabric, with wood slats resting on foam pads fixed by hook-and-loop fasteners to keep the base quiet. It comes in beige and grey.

Upholstered double bed frame with a winged linen headboard
Double, upholstered
Upholstered Double Bed Frame with Wingback Headboard, 135 x 190 cm

Wood slats sit on foam pads with hook-and-loop fasteners, with 15 cm of clearance underneath and a 500 kg static load.

What about wooden and wood-effect frames?

Solid wood is heavy and has a traditional look. Plenty of frames sold as wooden are wood-effect panels on steel, or particleboard, so read the material line. The industrial frame below is particleboard and steel with a rustic brown wood-effect headboard and footboard. It is not solid timber.

Its headboard is 103cm tall, the footboard is 40cm and it states 31cm of clearance underneath, a 300 kg capacity and a nine-leg steel frame.

Industrial double bed frame with rustic brown wood-effect headboard and footboard on a black steel frame
Double, wood-effect
Industrial Double Bed Frame with Under-Bed Storage, Rustic Brown

Particleboard and steel, 31 cm under-bed clearance and a stated 300 kg capacity.

How far apart should bed slats be?

Closer than you might think. Mattress makers set their own limits, and according to compiled mattress-maker guidance, maximum slat gaps run from about 6cm to 9cm depending on the maker. The same source warns that ignoring them could affect your mattress guarantee, so check your mattress paperwork first.

  • Steel slats, such as on the single frame above, give a firm base.
  • Wood slats, such as on the small double and the wingback, should sit firmly in their brackets with no sagging.
  • If you are heavy or share the bed with a partner, look for more slats and a higher stated load, not fewer.

How much room do you need around and under the bed?

Plan for a clear walkway on at least one side and the foot. Lay the frame's outside dimensions on the floor with masking tape before you order, and check the door swing, radiator and wardrobe doors against it.

Small double bed with a grey headboard in a compact bright UK bedroom
In a box room, a slim frame and a narrow bedside table protect your walkway.

Under the bed, measure from the floor to the underside of the base. The wingback frame above has 15cm of clearance, the industrial frame 31cm and the steel double 32cm, so they suit different storage. If you want lots of storage, look at ottoman beds, which use a lift-up base instead of a gap. Pair the bed with bedside tables that sit near the height of your mattress top.

Black steel bed frame with storage boxes tucked into the clear space underneath
Measure the gap under the frame before you buy storage boxes to fit it.

For wider room planning, see our bedroom furniture buying guide, which sits inside the Home Furniture Buying Guide UK.

Checklist before you buy a bed frame

  1. Confirm the mattress size you own or plan to buy, and match the frame to it.
  2. Check the frame's overall length and width against your room, with tape on the floor.
  3. Read the material line: steel, solid wood, particleboard or fabric.
  4. Check the stated weight limit, the slat count and the slat material.
  5. Check the clearance under the bed if you want storage boxes there.
  6. Check the headboard height against your wall space and any shelf or window.
  7. Look for the fire safety label on any upholstered headboard.

Frequently asked questions

Which is better, a metal or a wooden bed frame?

Metal is usually cheaper, slimmer and leaves more room underneath. Wood suits you if you want a warmer, heavier look. Check the exact material on any frame sold as wooden, because many are wood-effect over steel or particleboard.

What size is a small double bed frame?

A small double takes a 120 x 190cm mattress. The frame we show above measures 192 x 120cm in total. Always check the exact outside dimensions of the frame you are buying.

Do I need a slatted base or a solid base?

Either works, if it suits your mattress. Check your mattress maker's slat-gap guidance, covered above.

Can a bed frame support two adults?

Check the stated load on the listing. The frames above state 250 kg, 300 kg, 450 kg and 500 kg as maximum loads. These are the figures quoted on the individual product pages.

Are bed frames sold with a mattress?

No. Opal Retail sells frames only, so buy a mattress separately in the size the frame is made for.

Shop Opal Retail's bed frames

Metal, upholstered and wood-effect frames in single, small double, double and king sizes.

Shop bed frames →

Free UK delivery on all orders.

Previous article Clothes Rail or Wardrobe? When a Freestanding Rail Is Enough in a UK Bedroom
Next article Ottoman Beds UK: How They Work and What to Check Before You Buy
Your cart

Your cart is empty

Continue shopping